Hi,
I using 2.6 kernel Lenny Debian but i can not make USB work.
The modules usbcore, ohci-hcd , usbhid, usb-storage are loaded.
If I plug any device, lsusb only list the hub. When I connect any device, no
light blinking is produced by the device.
I checked the voltages in the port opening my usb memory and voila, there are
not 5 Volts in the USB. It seems to me like it is the same problem that you are
discussing here. Have you experienced this problem, did you solve it?
Thanks
Gonzalo
--- In Peter Harrison <> wrote:
>
> On Fri, Dec 4, 2009 at 2:10 AM, Gonzalo A. de la Vega
> <>wrote:
>
> >
> >
> > Now that I think about it, you can turn USB power on and off from the
> > console (have a look at the ts7xxx.subr script).
> >
> >
> Thanks very much.
>
> I saw something like this in busybox - the ts-linux version, but I didn't
> know there was a script like this I could run under
> Debian.
>
> With this I should be able to set it up to turn on USB on startup.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|