Re: [ts-7000] Re: Using the SPI on TS-7300

[Razvan-Ionut Stoian <>]

yeah, I saw that. However, I found all the files somewhere on an old box I keep around.

Try this link: http://www.transfer.ro/storage/SPI_triffid-9588c.zip

--- On Thu, 11/12/09, gcworrell <> wrote:

From: gcworrell <>
Subject: [ts-7000] Re: Using the SPI on TS-7300
To:
Date: Thursday, November 12, 2009, 12:50 PM

 

Thanks for the link, but it's dead...

Anyone tried this using the EP9302 interface?

G.

--- In .com, Razvan-Ionut Stoian
<razvan_ionut_ .> wrote:
>
> Hi,
>
> you should search this group's archive (I had to use the SPI on my
TS7200).
>
> hint: http://triffid. funkmunch. net/usbkey/ radiolink/
>
> --- On Thu, 11/12/09, gcworrell wrote:
>
> From: gcworrell
> Subject: [ts-7000] Re: Using the SPI on TS-7300
> To: .com
> Date: Thursday, November 12, 2009, 12:08 PM
>
>
>
>
>
>
>
> Ã
>
>
>
>
>
>
>
>
>
>
>
> I went to opencores and registered, but I can't access anything until
>
> someone approves my registration (however long that takes). Anyone
have
>
> something I can use now?
>
>
>
> --- In .com, Mike Ingle <finndmike62@ ...> wrote:
>
> >
>
> > There is an fpga on the ts7300, there are I am reasonably certain
spi
>
> > code projects on opencores.org.
>
> >
>
> > mike
>
> > On Nov 12, 2009, at 8:41 AM, gcworrell wrote:
>
> >
>
> > >
>
> > > I was tasked to support an "Instrumentation Emergency" if you can
>
> > > imagine one. I have to interface with a single ADIS16365 MEMS and
>
> > > record data at it's max rate (819.2 sps without an internal
clock).
>
> I
>
> > > tried using a 232-SPI interface device, but the TS-7300 serial
port
>
> > > just
>
> > > can't support that kind of throughput. I chewed up most of my time
>
> > > (I've only been given a week to complete this) trying to get this
to
>
> > > work, I've only a couple days left.
>
> > >
>
> > > I see the TS-7300 has an SPI interface already.
>
> > >
>
> > > 1) Has anybody done this already where I can get some guidance?
>
> Where
>
> > > do I attach the MEMS device? How do I wire up the TS-7300?
>
> > >
>
> > > 2) I've used the XDIO interface to sample DIO2, that's the extent
of
>
> > > my
>
> > > experience using the DIO on a TS-7300. Are there any SPI code
>
> snippets
>
> > > I can plagiarize?
>
> > >
>
> > > Thanks in advance for any assistance.
>
> > >
>
> > > G.
>
> > >
>
> > >
>
> >
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___