Thanks for the link, but it's dead...
Anyone tried this using the EP9302 interface?
G.
--- In Razvan-Ionut Stoian
<> wrote:
>
> Hi,
>
> you should search this group's archive (I had to use the SPI on my
TS7200).
>
> hint: http://triffid.funkmunch.net/usbkey/radiolink/
>
> --- On Thu, 11/12/09, gcworrell wrote:
>
> From: gcworrell
> Subject: [ts-7000] Re: Using the SPI on TS-7300
> To:
> Date: Thursday, November 12, 2009, 12:08 PM
>
>
>
>
>
>
>
> Â
>
>
>
>
>
>
>
>
>
>
>
> I went to opencores and registered, but I can't access anything until
>
> someone approves my registration (however long that takes). Anyone
have
>
> something I can use now?
>
>
>
> --- In .com, Mike Ingle <finndmike62@ ...> wrote:
>
> >
>
> > There is an fpga on the ts7300, there are I am reasonably certain
spi
>
> > code projects on opencores.org.
>
> >
>
> > mike
>
> > On Nov 12, 2009, at 8:41 AM, gcworrell wrote:
>
> >
>
> > >
>
> > > I was tasked to support an "Instrumentation Emergency" if you can
>
> > > imagine one. I have to interface with a single ADIS16365 MEMS and
>
> > > record data at it's max rate (819.2 sps without an internal
clock).
>
> I
>
> > > tried using a 232-SPI interface device, but the TS-7300 serial
port
>
> > > just
>
> > > can't support that kind of throughput. I chewed up most of my time
>
> > > (I've only been given a week to complete this) trying to get this
to
>
> > > work, I've only a couple days left.
>
> > >
>
> > > I see the TS-7300 has an SPI interface already.
>
> > >
>
> > > 1) Has anybody done this already where I can get some guidance?
>
> Where
>
> > > do I attach the MEMS device? How do I wire up the TS-7300?
>
> > >
>
> > > 2) I've used the XDIO interface to sample DIO2, that's the extent
of
>
> > > my
>
> > > experience using the DIO on a TS-7300. Are there any SPI code
>
> snippets
>
> > > I can plagiarize?
>
> > >
>
> > > Thanks in advance for any assistance.
>
> > >
>
> > > G.
>
> > >
>
> > >
>
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|