Hi Safarin,
I would recommend using some form of intermediate interface module controlled
by the TS-7390 via serial or Ethernet.
I was looking at the ADAM series of modules recently:
http://www.advantech.com/eautomation/remote-io/
These would interface to your devices, and the 7390 would perform the HMI and
high level control functions.
Hope this helps,
PJE
--- In "sangelion" <> wrote:
>
> Hi, I'm Safarin and was Computer Engineering degree student. I have been
> given Final Year Project to develop adaptive smart home. I never use SBC
> board before. The SBC board would be TS-7395 embeddedarm.
>
> In my case, I don't have knowledge about integrating electronic to electrical
> equipment. The output for this equipments are Fan, Light and Blind.
>
> What will be interface between DC electronic board and this AC home equipment
> thing???
>
> Can somebody help me??
>
> For sensor, I think of using LM35 (temperature), LDR (light).. am mine choose
> OK with this SBC board???
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|