I checked the cable and code. Code is running on the sbc. I added some message
for me to display them while its running. It writes some printf expressions at
some stages. It processes the writechar code. There is nothing about code. We
also checked the pre-compiled code. I think the problem is at connection or on
lcd. I don't know. we tried another cable but nothing changed.
--- In Abid Rashid <> wrote:
>
> hi,
> I have tested lcd on ts-7250 after building lcdmesg.c on PC ( crosscompiled).
> It worked without any change.
> As I remember it takes string as argument of what you want to display on LCD.
>
> Another thisa what I remember is the way you connect the cable on the header
> and the display.
> You may have to check that connection.
> Br,
> Abid
>
>
>
> --- On Thu, 9/10/09, ea_ebru <> wrote:
>
>
> From: ea_ebru <>
> Subject: [ts-7000] TS-7250 LCD
> To:
> Date: Thursday, September 10, 2009, 4:41 AM
>
>
>
>
>
>
> hi,
> I couln't get any display from my lcd by using lcdmesg.c. I changed the code
> a little bit, but still there is no display (There is light but no
> display).sometimes some black blocks come, but it means nothing.
> Do we have to do something about lcd before running the code?
>
> ebru
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|