[ts-7000] IOgear USB Stick.

To:
Subject:	[ts-7000] IOgear USB Stick.
From:	"ts7300" <>
Date:	Fri, 04 Sep 2009 11:27:07 -0000

Hi,
  1)Has anybody Tried to Configure Board as Access Point using IOGear USB 
stick.I already Tried But after certain Time USB stick Hanged the Board and 
then unpluged the USB stick and re-insert it again and again configure the 
wlan0 interface.

Has Anybody Faced this problem.If yes tell me solution of it.?
Is it USB stick problem??     



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] IOgear USB Stick., ts7300 <= Re: [ts-7000] IOgear USB Stick., Gonzalo A. de la Vega

Previous by Date:	[ts-7000] Re: WI-FI on TS7300, ts7300
Next by Date:	[ts-7000] crosstool-ng for TS-7250, ea_ebru
Previous by Thread:	[ts-7000] Phil's ADC kernel module thank you, mike ingle
Next by Thread:	Re: [ts-7000] IOgear USB Stick., Gonzalo A. de la Vega
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU