On Fri, Sep 4, 2009 at 8:27 AM, ts7300<> wrote:
>
>
> Hi,
> 1)Has anybody Tried to Configure Board as Access Point using IOGear USB
> stick.I already Tried But after certain Time USB stick Hanged the Board and
> then unpluged the USB stick and re-insert it again and again configure the
> wlan0 interface.
>
> Has Anybody Faced this problem.If yes tell me solution of it.?
> Is it USB stick problem??
>
This could be a driver/firmware problem. I have seen this on ZD1211 as
well as other chips, like Ralinks. They fail after a couple of days at
most. What I did was reloading the kernel module... if that doesn't
work, you can turn off the USB power (that's easy with the ts7xxx.subr
script functions), which is equivalent to unplug and replug the stick.
That works, of course, if the kernel is still runing.
It's just a workaround but it worked for me. Hope it does for you.
Gonzalo
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|