[ts-7000] Phil's ADC kernel module thank you

[mike ingle <>]

I want to say thank you for providing it.  I used it successfully as a skeleton for a fpga design on the ts7300 using interrupts. 

 

Also, I have an FPGA design which is very specific for my application (collecting data from an array of 576 x-ray detectors at 300hz).  Written in AHDL sorry.  Anyway, if there is interest I will post it and the driver.

 

On the same subject,  Has anyone had success getting the TS7300 FPGA to be 100% reliable?  I find that the design is subject to routing, and that there should be timing constraints on the cpu / cpld to fpga bus, which I don't know.  I messed with it and am down to an occasional (1 in a billion) write error to register space (0x72a00000).  Always the lsb.  For whatever reason the buffer space is OK (0x72000000).

 

Regards,

 

Mike

On Thu, Sep 3, 2009 at 4:54 AM, ts7300 <> wrote:

 

Hi,
I am using TS-7300M and having iogear USB stick.
1) But problem facing is that When USB stick is inserted and insmod zd_b.o system stuck up and processor Hang up.And System needed to reboot again and again every time.When I am inserting zd_b.o module

2)But when stick is not inserted in USB of Board and Starting with insmod zd_b.o first the module is inserted.But when USB stick is inserted then again system got hanged.
I Really messed up.
Has anybody Give any Tips upon that.......

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___