Daniel Smolik wrote:
> Breton M. Saunders napsal(a):
>
>>
>>
>> Hi Jesse,
>>
>> Thank you very much for making the source for sdcore2.c available.
>> That will make life a lot easier.
>> > I'm not sure whats meant by chilling out and "coming clean"? I was
>> > under the impression that the days equating closed-source software to a
>> > life of crime have come and gone from the bulk of the open source
>> > community.
>> >
>> This is a (rather small) reflection of my frustration - I did ask
>> several times for help and for private only access to the sdcore source
>> code for my project. I never received the source code which you provide
>> below. I also spent a significant amount of time both reworking the
>> shim, and decompiling your sdcore.
>>
>> My project was held up as a consequence.
>>
>> I'm happy to accept that there was a miscommunication - perhaps I should
>> have called you directly.
>>
>> > Is this the code you're looking for?
>> >
>> > ftp://ftp.embeddedarm.com/misc/sdcore2.c
>> <ftp://ftp.embeddedarm.com/misc/sdcore2.c>
>> >
>> YES!
>>
>> What this means is that I can contribute a forward patch from my 2.6.27
>> - which greatly simplifies linux use on your boards - here is why:
>>
>>
> Hi Breton,
> is possible get your souce ? I now run 2.6.28.3 on 7400 and would like use SD
> card.
> Thanks
>
> Dan
>
>
Sure - am working on cleaning up the (rather messy) code and will
produce a patch shortly.
I may be able to do a non-dma version tonight depending on time.
I've modified my code to use Jesse's (now available) sdcore2.c; which
makes life a bit easier. I have yet to determine if there is any code
of value in the reverse engineered code I generated earler.
Jessee: Can you GPL license your sdcore2.c - this gives your company
better protection, and allows us to avoid arguments around licensing in
the future.
Cheers,
-Brett
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|