Are you sure this will boot on a 7300? I am not using a 7390. I do not have
the fastboot enabled so it automatically tries to boot to the SD. It never
comes up with a login prompt when using that image.
--- In Scott Zimmerman <> wrote:
>
> Hmm,
>
> I'm sure that image does in fact boot. I have used it on several cards.
> Here's my exact steps:
>
> 1. dd=if=512mbsd-latest.dd of=/dev/mmcblk0
> 2. Insert the card and supply power to the TS-7390
> 3. Wait for the serial console to come up (I'm using the TS-9445 debug
> board).
> 4. From the serial console, do exit to exit the fastboot shell and start
> booting the sd card.
>
> On my setup, I ran tshelp from the serial console and then did the link
> command to make the SD card always boot.
>
> So in any case, I know that image works. What exactly do you see when it
> fails?
>
> ...Z
>
> On Mon, Aug 17, 2009 at 11:44 AM, Mike Lehmann <>wrote:
>
> >
> >
> > That image unfortunately does not boot on a 7300.
> >
> > --- In <ts-7000%40yahoogroups.com>, Scott
> > Zimmerman <zz@> wrote:
> > >
> > > The image I'm running came from here:
> > >
> > >
> > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7390-linux/binaries/ts-images/512mbsd-latest.dd.bz2
> > >
> > > Use dd to install it onto an SD card. It boots up into the debian desktop
> > > and I can run X11 apps from there.
> > >
> > > Hope that helps,
> > >
> > > ...Z
> > >
> > > On Sat, Aug 15, 2009 at 6:48 PM, Mike Lehmann <mikelehmann05@>wrote:
> > >
> > > >
> > > >
> > > > Could you send me the link to that image?
> > > >
> > > > Well, I was able to get an older version installed but am getting a
> > "Fatal
> > > > Server Error: No Screens Found"
> > > >
> > > >
> > > > --- In <ts-7000%40yahoogroups.com> <ts-7000%
> > 40yahoogroups.com>, Scott
> > > > Zimmerman <zz@> wrote:
> > > > >
> > > > > Hi Mike,
> > > > >
> > > > > I booted my 7390 from the SD card image and X11 was already installed
> > and
> > > > > ready to go. Are you using apt-get? What errors are you getting?
> > > > >
> > > > > ...Zz
> > > > >
> > > > > On Fri, Aug 14, 2009 at 3:18 PM, Mike Lehmann <mikelehmann05@>wrote:
> > > > >
> > > > > >
> > > > > >
> > > > > > I am having the hardest time installing X11 on the 7300 board. I am
> > > > getting
> > > > > > error after error after error. Has anyone done this successfully?
> > > > > >
> > > > > > Thanks.
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|