Re: [ts-7000] Re: Install X11 on 7300

[Scott Zimmerman <>]

Hmm,

I'm sure that image does in fact boot.  I have used it on several cards.  Here's my exact steps:

1. dd=if=512mbsd-latest.dd of=/dev/mmcblk0
2. Insert the card and supply power to the TS-7390
3. Wait for the serial console to come up (I'm using the TS-9445 debug board).
4. From the serial console, do exit to exit the fastboot shell and start booting the sd card.

On my setup, I ran tshelp from the serial console and then did the link command to make the SD card always boot.

So in any case, I know that image works.  What exactly do you see when it fails?

...Z

On Mon, Aug 17, 2009 at 11:44 AM, Mike Lehmann <> wrote:

 

That image unfortunately does not boot on a 7300.

--- In ts-7000%40yahoogroups.com, Scott Zimmerman <> wrote:
>

> The image I'm running came from here:
>
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7390-linux/binaries/ts-images/512mbsd-latest.dd.bz2
>
> Use dd to install it onto an SD card. It boots up into the debian desktop
> and I can run X11 apps from there.
>
> Hope that helps,
>
> ...Z
>

> On Sat, Aug 15, 2009 at 6:48 PM, Mike Lehmann <>wrote:

>
> >
> >
> > Could you send me the link to that image?
> >
> > Well, I was able to get an older version installed but am getting a "Fatal
> > Server Error: No Screens Found"
> >
> >

> > --- In ts-7000%40yahoogroups.com <ts-7000%40yahoogroups.com>, Scott

> > Zimmerman <zz@> wrote:
> > >
> > > Hi Mike,
> > >
> > > I booted my 7390 from the SD card image and X11 was already installed and
> > > ready to go. Are you using apt-get? What errors are you getting?
> > >
> > > ...Zz
> > >
> > > On Fri, Aug 14, 2009 at 3:18 PM, Mike Lehmann <mikelehmann05@>wrote:
> > >
> > > >
> > > >
> > > > I am having the hardest time installing X11 on the 7300 board. I am
> > getting
> > > > error after error after error. Has anyone done this successfully?
> > > >
> > > > Thanks.
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___