--- In "Theodore A. Roth" <> wrote:
>
> >
> > Finally, on this mailing list I found this guide link:
> > http://ted.openavr.org/Lenny-on-ts7390/
> > It seems nice, but I wonder why he goes trough the trouble of
> > debootstrapping when TS offer a debian-eabi already packaged
> > (debian-lenny-eabi-armel-512mb-apr092009.tar.gz).
> >
>
> Two reasons:
>
> 1. TS did not supply the eabi version when I went through all of that.
> 2. The TS image contained way more packages than I wanted. I would
> rather start with a minimal image and add only those things needed,
> than start with too much stuff and try to figure out what is not
> needed and remove the extras.
>
> Ted Roth
>
Hi Ted!
I don't care about having lot of stuff pre-installed, SDCARD space is large
enough. Maybe background process should be minimized but I doubt it's a problem.
Still, that doesn't explain why my card don't boot. If I check your guide, you
use the same partition model as I do, as well as the same (mr/kernel/initrd). I
was thinking my kernel/initrd had to be changed but I guess not.
I guess the TS eabi package already have modules and other things pre-installed
too, so what's missing in my setup to boot? Your linuxrc-sdroot-lenny-install
seems specialized because it's a debootstrap, not becuase it's lenny.
I managed to re-compile the kernel with EABI support, but I don't even know how
to send it to partition2 of the card, and if the ts-provided kernel support
eabi it's no use.
Any help?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|