[ts-7000] ts7300 hangs with ts-7vv board

To:
Subject:	[ts-7000] ts7300 hangs with ts-7vv board
From:	"palmeirapfmp" <>
Date:	Thu, 25 Jun 2009 17:38:22 -0000

I´m try to use a ts-7300 with ts-7kv board ( I need to use the fpga mem), the
system recognize the board (in the full boot) and hangs it it shows the message
"loading ts-7kv modules:" and hangs include mouse and keyboard
the vga output showns blank (and dirty) screen


anybody help me
Palmeira
PS I've tryed remove the 'startfpga startup, without efefect



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ts7300 hangs with ts-7vv board, palmeirapfmp <=

Previous by Date:	[ts-7000] ts tecnology support, palmeirapfmp
Next by Date:	Re: [ts-7000] Amusing Serial Parity Mismatch With CRC Okay, Jim Jackson
Previous by Thread:	[ts-7000] ts tecnology support, palmeirapfmp
Next by Thread:	[ts-7000] Installing binary kernel 2.6 on ts7300, mmcdonal2001
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU