[ts-7000] Installing binary kernel 2.6 on ts7300

To:
Subject:	[ts-7000] Installing binary kernel 2.6 on ts7300
From:	"mmcdonal2001" <>
Date:	Sat, 27 Jun 2009 16:53:47 -0000

Hi,

I would like to run the pre-compiled kernel 2.6 I downloaded from the ts 
website on my ts7300. Does anybody know how to install it on the sd card?  I 
tried dd if=zImage-7300-ts11 of=/dev/discs/disc0/part1, but the kernel just 
hangs after decompressing itself on boot. 

Thanks
Mike



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Installing binary kernel 2.6 on ts7300, mmcdonal2001 <= Re: [ts-7000] Installing binary kernel 2.6 on ts7300, mike . mcdonald0

Previous by Date:	[ts-7000] Re: Memory buffers goes to zero - ts7260 hangs, tedapt
Next by Date:	[ts-7000] Lenny on TS-TPC-7390, akmartin73
Previous by Thread:	[ts-7000] ts7300 hangs with ts-7vv board, palmeirapfmp
Next by Thread:	Re: [ts-7000] Installing binary kernel 2.6 on ts7300, mike . mcdonald0
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU