--- In sean machin <> wrote:
>
> Hi All,
>
> Is anyone out there using the TS-TPC-7390 for industrial control
> applications? I'm thinking of using one for a new
> battery monitoring project. Any feedback on the quality of the board,
> any problems encountered with the
> hardware or software would be appreciated. I basically want to know if
> it's "production ready". One of the
> earlier TS boards I used was more of a pre-production system.
>
> Thanks,
> Sean
>
Hi Sean,
I'm currently developing an industrial process monitoring/HMI system with the
TS-TPC-7390. I've had a number of 7300 based systems in an automotive plant for
the last year without problems (other than the BAT3 cards).
Before I launch the 7390, I'll need to have it EMC tested within my
application. My application runs from the fastboot environment, saving data to
the SD card. I'm working on a battery UPS to allow more controlled shutdown
when power is removed from without warning.
Regards,
PJE
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|