ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: Steps of installing debian sarge in ts-7200?

To:
Subject: Re: [ts-7000] Re: Steps of installing debian sarge in ts-7200?
From: Magda <>
Date: Thu, 21 May 2009 18:23:42 +0100
no problem, sorry I did not think it was that basic linux question.

I will google it.

Thanks for all your help! :))

Magda
j.chitte wrote:
>
>
> --- In  <ts-7000%40yahoogroups.com>, 
> "" <> wrote:
> >
> > thanks,
> >
> > I've included scsi support and I get the same problem.
> >
> > is it needed to mount the usbkey somewhere?
> >
> > Magda
>
> of course: note the device name
>
> What have you actually enabled in the kernel from what was suggested d 
> here? I get the feeling you have not it all. This is bog std linux 
> stuff, you should just google it rather than expecting step by step 
> instructions.
>
> Your trouble on redboot was fair enough but you should not flood this 
> group with low level linux help questions.
>
> best regards.
>
> >
> > --- In  <ts-7000%40yahoogroups.com>, 
> "j.chitte" <j.chitte@> wrote:
> > >
> > > --- In  <ts-7000%40yahoogroups.com>, 
> "s.magda@" <msanchez@> wrote:
> > > >
> > > > Hi, thanks for your suggestions.
> > > >
> > > > I have my kernel image compiled with usb, usb-storage, ext2/3 
> and it does not work. The usbkey is detecting when loading the kernel 
> image though. This is what I get:
> > > >
> > > > RedBoot> exec -c "console=ttyAM0,115200 root=/dev/sda1 rootwait"
> > > > Using base address 0x00218000 and length 0x001bbdf0
> > > > Uncompressing L....
> > >
> > >
> > > I dont see /dev/sda1 being detected there. A usb device yes but I 
> dont see it being given /dev/sda1. The last line says it waiting for 
> /dev/sda1 because you told it to , not because it found it.
> > >
> > > have you got devfs in your kernel and scsi and mass-storage 
> modules built-in ?
> > >
> >
>
> 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU