Till now what I am doing is only replacing the zImage with old one but not
newly compiled pppd modules in
/libmodules/2.4.26-ts11/kernel/drivers/net/ppp_generic etc.
Can somebody guide me the steps of installing modules.
-----------------------------------------------------
--- In "charliem_1216" <> wrote:
>
> --- In "ts7300" <ts7300@> wrote:
> >
> > Just clear me Doubt I had recompiled the kernel with config_ppp_multlink
> > options and newly zImage is replaced with old one.Afterward Is their any
> > need to insert PPP module for multlink??
> > Already below modules are present
> > ppp_generic
> > ppp_async
> > pppoe
> > pppoxPPP
>
> Multilink appears to be wholly included in ppp_generic, as an "#ifdef". So,
> you must be sure you are installing the *newly compiled* ppp_generic module,
> not only the new zImage. If you are sure you need PPP all the time, you
> could build it into the kernel.
>
> regards, ........ Charlie
>
> > --- In "ts7300" <ts7300@> wrote:
> > >
> > > Thanx for reply,But when I am dialing from Linux Distro Instead from
> > > TS-7300 then connection is successfull.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|