Kindly suggest me some thing on this why its showing unsupported protocol while
I had compiled with config_ppp_muliltink support.
> hi,
> I have recompiled the kernel with enabling config_ppp_multilnk support and
> make zImage.then using dd utility replace it with existing image
> dev/sdcard0/disc0/part1.and then added the mp options in pppd file with
> setting mrru 1500.and then using pppd call ppp0
> --------------------------------------------------
> pppd options in effect:
> debug # (from /etc/ppp/options)
> -detach # (from /etc/ppp/options)
> persist # (from /etc/ppp/options)
> dump # (from /etc/ppp/options)
> mp # (from /etc/ppp/options)
> noauth # (from /etc/ppp/options)
> /dev/ttyS2 # (from command line)
> nolock # (from /etc/ppp/options)
> cdtrcts # (from /etc/ppp/options)
> modem # (from /etc/ppp/options)
> asyncmap 0 # (from /etc/ppp/options)
> mru 1500 # (from /etc/ppp/options)
> mtu 1500 # (from /etc/ppp/options)
> passive # (from /etc/ppp/options)
> mrru 1500 # (from /etc/ppp/options)
> hide-password # (from /etc/ppp/options)
> proxyarp # (from /etc/ppp/options)
> usepeerdns # (from /etc/ppp/options)
> noipx # (from /etc/ppp/options)
> using channel 2
> Starting negotiation on /dev/ttyT8S0
> sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x295c2073> <pcomp> <accomp>
> <mrru 1500> <endpoint [MAC:00:1b:fc:59:03:cb]>]
> rcvd [LCP ConfRej id=0x1 <magic 0x295c2073>]
> sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp> <mrru 1500>
> <endpoint [MAC:00:1b:fc:59:03:cb]>]
> rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <pcomp> <accomp> <mrru 1500>
> <endpoint [MAC:00:d0:69:40:c5:f4]>]
> sent [LCP ConfAck id=0x1 <asyncmap 0x0> <pcomp> <accomp> <mrru 1500>
> <endpoint [MAC:00:d0:69:40:c5:f4]>]
> rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp> <mrru 1500>
> <endpoint [MAC:00:1b:fc:59:03:cb]>]
> Using interface ppp0
> New bundle ppp0 created
> sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1
> 0.0.0.0> <ms-dns3 0.0.0.0>]
> rcvd [LCP ProtRej id=0x2 00 3d c0 00 00 00 80 fd 01 01 00 0f 1a 04 78 00 18
> 04 78 00 15 03 2f]
> Protocol-Reject for unsupported protocol 'Multi-Link' (0x3d)
> rcvd [LCP ProtRej id=0x3 00 3d c0 00 00 01 80 21 01 01 00 1c 02 06 00 2d 0f
> 01 03 06 00 00 00 00 81 06 00 00 00 00 83 06 ...]
> Protocol-Reject for unsupported protocol 'Multi-Link' (0x3d)
> sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1
> 0.0.0.0> <ms-dns3 0.0.0.0>]
> --------------------------------------------------------------------
> then why Protocol-Reject for unsupported protocol 'Multi-Link' (0x3d) ERROR
> is coming. already I recompiled the kernel with setting multilink options.
> > On Wed, Nov 5, 2008 at 4:08 PM, odonovan_dan <danodonovan@> wrote:
> >
> > > I'm not sure if this helps, but I recently tried pppd on a ts7260
> > > running linux-2.4.16-ts11, with the multilink option set in
> > > /etc/ppp/options, and I got an error to say that the option wasn't
> > > supported.
> > >
> > > I haven't tried to find a way to enable it yet.
> > >
> > > --- In <ts-7000%40yahoogroups.com>, "ts7300"
> > > <ts7300@> wrote:
> > > >
> > > > Hi,
> > > > I am using TS-7300 Board,How we can ensure or check that Kernel
> > > > which is shiped has multilink support is present or not.I have gone
> > > > through Options file of PPP.But no multilink options is their.So,can
> > > > somebody guide me how to check multilink options is present ??
> > > >
> > > > Thanx,
> > > >
> > >
> > >
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|