--- In "ts7300" <> wrote:
>
> Kindly suggest me something upon this.
> --- In "ts7300" <ts7300@> wrote:
> >
> > Will I need to add any additional module apart from pppox pppoe ppp_async
> > ppp_generic slhc.
> > --- In "ts7300" <ts7300@> wrote:
> > >
> > > Kindly suggest me some thing on this why its showing unsupported protocol
> > > while I had compiled with config_ppp_muliltink support.
> > > > hi,
> > > > I have recompiled the kernel with enabling config_ppp_multilnk
> > > > support and make zImage.then using dd utility replace it with existing
> > > > image dev/sdcard0/disc0/part1.and then added the mp options in pppd
> > > > file with setting mrru 1500.and then using pppd call ppp0
You may have better response asking in a more appropriate forum. This is not
specific to the TS boards, and there is likely no-one here that has run into
your problem.
To me, it looks like the peer has rejected multipoint, not your TS board.
regards .......... Charlie
> > > > --------------------------------------------------
> > > > pppd options in effect:
> > > > debug # (from /etc/ppp/options)
> > > > -detach # (from /etc/ppp/options)
> > > > persist # (from /etc/ppp/options)
> > > > dump # (from /etc/ppp/options)
> > > > mp # (from /etc/ppp/options)
> > > > noauth # (from /etc/ppp/options)
> > > > /dev/ttyS2 # (from command line)
> > > > nolock # (from /etc/ppp/options)
> > > > cdtrcts # (from /etc/ppp/options)
> > > > modem # (from /etc/ppp/options)
> > > > asyncmap 0 # (from /etc/ppp/options)
> > > > mru 1500 # (from /etc/ppp/options)
> > > > mtu 1500 # (from /etc/ppp/options)
> > > > passive # (from /etc/ppp/options)
> > > > mrru 1500 # (from /etc/ppp/options)
> > > > hide-password # (from /etc/ppp/options)
> > > > proxyarp # (from /etc/ppp/options)
> > > > usepeerdns # (from /etc/ppp/options)
> > > > noipx # (from /etc/ppp/options)
> > > > using channel 2
> > > > Starting negotiation on /dev/ttyT8S0
> > > > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x295c2073> <pcomp>
> > > > <accomp> <mrru 1500> <endpoint [MAC:00:1b:fc:59:03:cb]>]
> > > > rcvd [LCP ConfRej id=0x1 <magic 0x295c2073>]
> > > > sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp> <mrru 1500>
> > > > <endpoint [MAC:00:1b:fc:59:03:cb]>]
> > > > rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <pcomp> <accomp> <mrru 1500>
> > > > <endpoint [MAC:00:d0:69:40:c5:f4]>]
> > > > sent [LCP ConfAck id=0x1 <asyncmap 0x0> <pcomp> <accomp> <mrru 1500>
> > > > <endpoint [MAC:00:d0:69:40:c5:f4]>]
> > > > rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp> <mrru 1500>
> > > > <endpoint [MAC:00:1b:fc:59:03:cb]>]
> > > > Using interface ppp0
> > > > New bundle ppp0 created
> > > > sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> > > > sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1
> > > > 0.0.0.0> <ms-dns3 0.0.0.0>]
> > > > rcvd [LCP ProtRej id=0x2 00 3d c0 00 00 00 80 fd 01 01 00 0f 1a 04 78
> > > > 00 18 04 78 00 15 03 2f]
> > > > Protocol-Reject for unsupported protocol 'Multi-Link' (0x3d)
> > > > rcvd [LCP ProtRej id=0x3 00 3d c0 00 00 01 80 21 01 01 00 1c 02 06 00
> > > > 2d 0f 01 03 06 00 00 00 00 81 06 00 00 00 00 83 06 ...]
> > > > Protocol-Reject for unsupported protocol 'Multi-Link' (0x3d)
> > > > sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> > > > sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1
> > > > 0.0.0.0> <ms-dns3 0.0.0.0>]
> > > > --------------------------------------------------------------------
> > > > then why Protocol-Reject for unsupported protocol 'Multi-Link' (0x3d)
> > > > ERROR is coming. already I recompiled the kernel with setting multilink
> > > > options.
> > > > > On Wed, Nov 5, 2008 at 4:08 PM, odonovan_dan <danodonovan@> wrote:
> > > > >
> > > > > > I'm not sure if this helps, but I recently tried pppd on a ts7260
> > > > > > running linux-2.4.16-ts11, with the multilink option set in
> > > > > > /etc/ppp/options, and I got an error to say that the option wasn't
> > > > > > supported.
> > > > > >
> > > > > > I haven't tried to find a way to enable it yet.
> > > > > >
> > > > > > --- In <ts-7000%40yahoogroups.com>, "ts7300"
> > > > > > <ts7300@> wrote:
> > > > > > >
> > > > > > > Hi,
> > > > > > > I am using TS-7300 Board,How we can ensure or check that Kernel
> > > > > > > which is shiped has multilink support is present or not.I have
> > > > > > > gone
> > > > > > > through Options file of PPP.But no multilink options is
> > > > > > > their.So,can
> > > > > > > somebody guide me how to check multilink options is present ??
> > > > > > >
> > > > > > > Thanx,
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|