[ts-7000] Re: TS7200 and non-standard baud rates

["Fred" <>]

--- In  Steve Weigold <> wrote:
> non-standard baud rate.  Some searching has yielded 
> suggestions of setting the rate to 38400 in termios 
> and then using "setserial" to actually tweak the rate 
> directly.  Does this work on the 7200.

It works just fine. On the TS7250 I get 128,000 baud when I do this:

    if (TRUE == for_half_duplex)
    {
        system("setserial /dev/tts/0 irq 22 uart 16550A skip_test baud_base 
1662500 spd_cust divisor 12");

        running_at_this_baud = B38400;
    }




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/