[ts-7000] TS7200 and non-standard baud rates

[Steve Weigold <>]

Hi Everyone,

I'm working on a project with a 7200 and the RS485 option (half duplex) 
if it matters.  Booting from CF with Debian.  Turns out I need to use a 
non-standard baud rate.  Some searching has yielded suggestions of 
setting the rate to 38400 in termios and then using "setserial" to 
actually tweak the rate directly.  Does this work on the 7200.  Has 
anyone done anything with a non-standard baud rate?  Any suggestions 
would be appreciated.

Steve



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/