On 3/2/09, Mark Randall <> wrote:
> Hey everyone,
Hey
> I am just beginning a project with the ts-2750 board. I
> am in need of most of the low level hardware ie: timers, a2d, i/o, and
> most importantly hardware interrupts. I have been able to access both
> the on board and extra a2d via mem. map, but I really need them to be
> interrupt driven.. I can also access the 16 bits of onboard I/O but
> the documentation says that all of these pins should be able to be
> assigned interrupts as well. I have not had much luck figuring out how
> to configure any of these. I also will be needing access to the 2
> onboard timers as I will need to write some PWM drives.
>
> Is there somthing I am missing? Have there been drivers written for
> all or any of this? Is there a TS72XX header file?
> Thanks for any and all your help....
>
>
Look at the ep9301 manual, p.531
http://www.embeddedarm.com/documentation/third-party/ts-7000_ep9301-ug.pdf
there is also pin debouncing, which the TS manual makes very little mention of.
joel
>
> newbie Markiemarc
>
>
--
Joel R. Morgan
Morgan Millwright Services, Inc.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|