[ts-7000] Serial port mapping on TS7370

ts-7000

[ts-7000] Serial port mapping on TS7370

To:
Subject:	[ts-7000] Serial port mapping on TS7370
From:	"fredolamainfroide" <>
Date:	Tue, 03 Mar 2009 13:34:45 -0000

Hello,
I am unable to find wich device (/dev/tty***) to use to access serial
com3 and com4 on COM1 header.
Do I have to setup something, or install module ?

Thanks'

Fred



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Serial port mapping on TS7370, fredolamainfroide <= Re: [ts-7000] Serial port mapping on TS7370, Michael Schmidt

Previous by Date:	[ts-7000] Ts-7300 wifi access point, ts7300
Next by Date:	[ts-7000] newbie, Joel Morgan
Previous by Thread:	[ts-7000] Ts-7300 wifi access point, ts7300
Next by Thread:	Re: [ts-7000] Serial port mapping on TS7370, Michael Schmidt
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU