Hi --
(sorry if an incomplete message came through ...)
--- In "teohoeeng" <> wrote:
>
> I have similar problems when I try to use ttts4, the COM 3 header on
> TS-7800. My original serial code works fine on my Linux laptop, but
> when I ported the code over, I got garbage. I suspect the TS7800
> com3 baudrate wasn't set according to what I stated in my serial
Check that you have the latest version of the kernel & distro (after
10-Jun-08 at least). Many things have been fixed, details and update
instructions are here:
http://www.embeddedarm.com/about/resource.php?item=343
And a TS-7800-linux changelog is here:
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7800-linux/VERSION
Also, see this thread, which ends up finding that the tsuart7800
module cannot be updated by a rmmod / insmod sequence:
http://tech.groups.yahoo.com/group/ts-7000/message/13772
regards, ......... Charlie
> code. But I try to use "setserial" command in TS7800, but this
> command wasn't installed. I wonder in shell or in the script, how
> can I set the baudrate to be permanent to the number I want for
> various serial ports?
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|