ts-7000
[Top] [All Lists]

[ts-7000] Re: TS-7400 crashes with GRPS connection

To:
Subject: [ts-7000] Re: TS-7400 crashes with GRPS connection
From: "hgcaspeta" <>
Date: Sat, 28 Feb 2009 16:35:16 -0000
--- In  Petr ©tetiar <> wrote:
>
> hgcaspeta <> [2009-02-27 18:49:20]:
>
> > Hello
>
> Hi,
>
> > I am using a TS-7400 board. I can surf the internet with the IOGEAR
> > usb wireless device, but when I try to use my GRPS modem the board
> > crashes if I enable "defaultroute" in my configuration file. If I do
> > not enable "defaultroute" my modem connects to the internet by I can't
> > navegate because I don't have a default route. If I set defaultroute
> > with "route add defaultroute ppp0" the system crashes.
>
> And if it wouldn't crash with route it would crash in different
part. You're
> using acm module so I bet, that you're using TS kernel. If I were you, I
> would try some latest 2.6 kernel, althought it isn't bug free either[1].
>
> > I have an externat usbhub with external power, so the modem is not
> > getting energy from the TS7400.
>
> It's kernel, mainly tty/usb/serial problems. Nothing to do with USB
power.
> 
> > I can connect to the internet in my lap using the same configuration
>
> Do you use same kernel as on ts-7400 on your laptop? :)
>
>
> 1. http://www.kerneloops.org/search.php?search=serial_write
>

Ynezz

As you can see I'm a newbie. I tried to compile kernel linux-2.6.21-ts
with crosstools but I get a lot of errors:

scripts/basic/fixdep.c:107:23: error: sys/types.h: No such file or
directory
scripts/basic/fixdep.c:108:22: error: sys/stat.h: No such file or
directory
scripts/basic/fixdep.c:109:22: error: sys/mman.h: No such file or
directory
scripts/basic/fixdep.c:110:20: error: unistd.h: No such file or directory
scripts/basic/fixdep.c:111:19: error: fcntl.h: No such file or directory
scripts/basic/fixdep.c:112:20: error: string.h: No such file or directory
scripts/basic/fixdep.c:113:20: error: stdlib.h: No such file or directory
scripts/basic/fixdep.c:114:19: error: stdio.h: No such file or directory
.......

I think it's a path issue. If I add paths (export path command) for
crosstool bin, kernel source, etc I still get those errors. Where I
can find a COMPLETE compile kernel manual and Crosstool manual? Or
where I can find a compiled kernel?

Thanks.

Hugo



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU