[ts-7000] ts7800 avr unresponsive

To:
Subject:	[ts-7000] ts7800 avr unresponsive
From:	"Dan" <>
Date:	Thu, 19 Feb 2009 19:45:53 -0000

I'm using the ts7800ctl program to play around with the ADC.  Every
now and then it stops producing output.  After I hit CTRL-C to kill
it, I can't even turn the red LED on and off and have to power cycle
the whole board (reboot and shutdown -r both shutdown successfully but
never comes back up).  It seems like the AVR is becoming totally
unresponsive.

Anyone know what's going on and/or how to fix it?



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ts7800 avr unresponsive, Dan <=

Previous by Date:	[ts-7000] Re: eCos, Frank Pagliughi
Next by Date:	Re: [ts-7000] eCos, Jim Jackson
Previous by Thread:	[ts-7000] Redboot, Girisha Durrel De Silva
Next by Thread:	[ts-7000] header file problem???, anadigpune
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU