[ts-7000] Redboot

To:
Subject:	[ts-7000] Redboot
From:	"Girisha Durrel De Silva" <>
Date:	Thu, 19 Feb 2009 12:55:30 -0000

Though the manual says to press Ctrl+C redboot prompt never comes and
it always boots the linux in the flash.

I am using minicom and the serial cable (null) that I got from the
development kit.

Why is the reason for that?

Regards
Girisha



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Redboot, Girisha Durrel De Silva <= Re: [ts-7000] Redboot, Girisha De Silva Re: [ts-7000] Redboot, Larry

Previous by Date:	[ts-7000] eCos, Girisha Durrel De Silva
Next by Date:	[ts-7000] eCos, Girisha Durrel De Silva
Previous by Thread:	[ts-7000] eCos, Girisha Durrel De Silva
Next by Thread:	Re: [ts-7000] Redboot, Girisha De Silva
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU