Re: [ts-7000] Redboot

[Girisha De Silva <>]

Hey guys

Got Ctrl+C working. I changed the settings in minicom. Needed to adjust the hardware flow control. and CTRL+C worked fine. But still I am not aware of what is the OS that came with the board.

I used this for a ADC application and the sample rate was pretty slow. Thats why I thought I need a real time OS on to this. Reading some of the emails I understood that I will need to use eCos.

How can I install eCos? Will the ADC samples in the group work in this OS as well?

Please help me guys................ Please!!!

Regards
Girisha

---

From: Girisha Durrel De Silva <>
To:
Sent: Thursday, February 19, 2009 6:25:30 PM
Subject: [ts-7000] Redboot

Though the manual says to press Ctrl+C redboot prompt never comes and
it always boots the linux in the flash.

I am using minicom and the serial cable (null) that I got from the
development kit.

Why is the reason for that?

Regards
Girisha

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___