>
> In case this helps:
>
> I recently had to recompile a kernel for a TS7400 with 128MB flash.
> I was having problems configuring a kernel that could detect the
> on-board flash and mount the rootfs partition.
> Then I came across this source tarball, which appeared to have
> improved support for the 128MB flash on the TS7400:
>
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7400-linux/sources/ts7400_tskernel-jul162008.tar.gz
>
> Might be worth a try?
It certainly was worth a try.
With ts7400_tskernel-jul162008.tar.gz
make ts7260_2k_config
make oldconfig
make zImage
And it worked!
Thanks,
Richard
> >
> > Hi,
> >
> > I have a TS7260 with 128K Flash and it appears to have the YAFFS2 file
> > system pre installed. I compiled compiled a kernel
> > ts7400_tskernel-2.4.26-ts11-may152007.tar.gz using the
> > ts7260_2k_config which enabled YAFFS2. When I boot from this kernel, I
> > can mount the YAFFS partition (/dev/mtdblock/1) ok but the directory
> > structure is gone and there are lots of corrupt? files in lost+found.
> > If I boot using the pre installed kernel, the yaffs2 partition has a
> > complete and working file system.
> >
> > Why is the ts11 kernel unable to see the files correctly? Should I re
> > format the yaffs2 partition and carry on?
> >
> > Regards,
> > Richard
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|