[ts-7000] yaffs2 with TS7260 ts11 kernel

["Richard Williams" <>]

Hi,

I have a TS7260 with 128K Flash and it appears to have the YAFFS2 file
system pre installed. I compiled compiled a kernel
ts7400_tskernel-2.4.26-ts11-may152007.tar.gz using the
ts7260_2k_config which enabled YAFFS2. When I boot from this kernel, I
can mount the YAFFS partition (/dev/mtdblock/1) ok but the directory
structure is gone and there are lots of corrupt? files in lost+found.
If I boot using the pre installed kernel, the yaffs2 partition has a
complete and working file system.

Why is the ts11 kernel unable to see the files correctly? Should I re
format the yaffs2 partition and carry on?

Regards,
Richard





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/