Re: [ts-7000] Re: TS7200 COM2 - ttyAM1 Issues

[Craig Gates <>]

So what are you trying to do?

I don't understand what you mean by "read commands"?

did you write a program to use COM2, or are you trying to use
it as a login port?

Hi,

How do I disable the getty?

--- In .com, "alexanchoragealask

a" m("...","alex");"><> wrote:
>
> Hi,
>
> I had similar problem when I started with TS7260. It turned out that
> I had to disable "getty" on COM2. Try it, maybe it will solve the
> problem in your case also.
>
> - Alex
>
> --- In .com, "bonjelo2000" <rameandc@> wrote:
> >
> > I have had success with write commands over COM2 (ttyAM1) but have
> > been unsuccessful with the read command. I am using the cable
> > supplied in the 7200 Kit.
> >
> > Has anyone had any success with read commands on this port? Is the
> > cable supplied wired correctly?
> >
> > Thanks
> >
>

bonjelo2000 wrote:

Hi,

I commented out the line below from the inittab file and still have no
luck.

#T1:23:respawn:/sbin/getty -L ttyAM1 115200 vt100

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___