Look at the link below
https://wiki.cs.earlham.edu/index.php/HIP:TS-7000:serial
- Alex
--- In "bonjelo2000" <> wrote:
>
> Hi,
>
> How do I disable the getty?
>
>
> --- In "alexanchoragealaska" <alex@> wrote:
> >
> > Hi,
> >
> > I had similar problem when I started with TS7260. It turned out that
> > I had to disable "getty" on COM2. Try it, maybe it will solve the
> > problem in your case also.
> >
> > - Alex
> >
> > --- In "bonjelo2000" <rameandc@> wrote:
> > >
> > > I have had success with write commands over COM2 (ttyAM1) but have
> > > been unsuccessful with the read command. I am using the cable
> > > supplied in the 7200 Kit.
> > >
> > > Has anyone had any success with read commands on this port? Is the
> > > cable supplied wired correctly?
> > >
> > > Thanks
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|