[ts-7000] Re: TS7200 COM2 - ttyAM1 Issues

["alexanchoragealaska" <>]

Hi,

I had similar problem when I started with TS7260.  It turned out that
I had to disable "getty" on COM2.  Try it, maybe it will solve the
problem in your case also.

- Alex

--- In  "bonjelo2000" <> wrote:
>
> I have had success with write commands over COM2 (ttyAM1) but have
> been unsuccessful with the read command.  I am using the cable
> supplied in the 7200 Kit. 
> 
> Has anyone had any success with read commands on this port?  Is the
> cable supplied wired correctly?  
> 
> Thanks
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/