[ts-7000] Step to copy kernel image on blank card

To:
Subject:	[ts-7000] Step to copy kernel image on blank card
From:	"ts7300" <>
Date:	Thu, 29 Jan 2009 06:30:03 -0000

hi,
   I have download the kernel source from ftp after compilation two
file is generated vmlinux and system.map.I am having TS7300 board with
Blank SD card on it.can sombody guide me how to put image of these two
file which is generated during comilation of kernel on Blank Card.


Thanx


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Step to copy kernel image on blank card, ts7300 <=

Previous by Date:	Re: [ts-7000] Recording Sound on TS-7800: One -- Last -- Try, Andrew Taylor
Next by Date:	[ts-7000] rtc display, jignesh_45
Previous by Thread:	[ts-7000] Recording Sound on TS-7800: One -- Last -- Try, Frank
Next by Thread:	[ts-7000] rtc display, jignesh_45
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU