Hi Rod,
I'm likely to start with an open source stack. The TS-7390 will be a
BACnet device and web server while the pressure transducer will also
be a BACnet device. Both will communicate BACnet to each other.
Robert
--- In "Rod Nussbaumer" <> wrote:
>
> --- In "Robert" <robert@> wrote:
> >
> > Thank you PJE,
> >
> > I'm looking to control an actuator in a 2-way fan system by measuring
> > the atmosphere pressure between two rooms. In other words, a special
> > room has to be either positive air pressure or negative air pressure,
> > at the user's command on the controller board. Also, I'm looking at
> > using BACnet as the protocol of choice with the TS-7390.
> >
> > If you can help me with links or anything, I would appreciate it.
>
> I don't think that information is very useful to determine how to
> prototype a GUI (or other) interface. However, I would be interested
> to know about your plans for interfacing to BACnet. Will you be using
> an open source BACnet stack, commercial stack, other? Will your
> TS-7390 become a BACnet device with its own pressure transducer, or
> will you simply be monitoring a BACnet device/object that does the
> pressure measurement?
>
> --- rod.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|