--- In "Robert" <> wrote:
>
> Thank you PJE,
>
> I'm looking to control an actuator in a 2-way fan system by measuring
> the atmosphere pressure between two rooms. In other words, a special
> room has to be either positive air pressure or negative air pressure,
> at the user's command on the controller board. Also, I'm looking at
> using BACnet as the protocol of choice with the TS-7390.
>
> If you can help me with links or anything, I would appreciate it.
I don't think that information is very useful to determine how to
prototype a GUI (or other) interface. However, I would be interested
to know about your plans for interfacing to BACnet. Will you be using
an open source BACnet stack, commercial stack, other? Will your
TS-7390 become a BACnet device with its own pressure transducer, or
will you simply be monitoring a BACnet device/object that does the
pressure measurement?
--- rod.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|