[ts-7000] TS-7350 COM2

["kenwmetzler" <>]

I'm having trouble getting the UART on the COM2 connector to work in RS-
232 mode. I am only hooked up to pins 2, 3 and 5 to avoid any conflict 
with 485 signals. This setup works find on the COM1 connector when I 
reference it as /dev/ttyAM1. The dmesg command does show a ttyAM2 but 
this does not seem to work. I can open the device but sends & receives 
don't go anywhere. Do I need to load an additional driver and use a 
different name?

Thanks for your help,
Ken


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/