RE: [ts-7000] Rewriting redboot on a TS-7260 with serial_blaster

[Steve Meisner <>]

Thanks for the reply. I am never seeing the Redboot> prompt before the timeout. So the redboot image I am sending down to the 7260 is obviously wrong. I am having trouble determining which of the bin’s up on Technologic’s ftp site could be used…if any?

 

I did try running minicom (just to be sure) and I got no response at all.

Steve

 

From: [ On Behalf Of Petr Stetiar
Sent: Friday, January 09, 2009 7:53 AM
To:
Subject: Re: [ts-7000] Rewriting redboot on a TS-7260 with serial_blaster

 

Steve Meisner <steve%40meisners.net> [2009-01-09 07:46:20]:

> Could someone give me some pointers here? I managed to lose the redboot boot
> block on a TS-7260 I have. I have managed to get serial_blaster down to a
> newly built Debian Linux system and it's working. But what images for
> boot.bin and redboot.bin should I be using? When I use the boot.bin that
> comes out of the make process, I see the banner indicating a TS-7250 and not
> 7260...does that matter? And I have not come across a redboot.bin that seems
> to work to allow the 7260 to boot at all...I always get a timeout at the end
> of serial_blaster.

I think, that timeout isn't a problem. Just try run terminal, RedBoot should be
there. It's a long time I've erased RedBoot on my board so I don't remeber it
correctly.

-- ynezz

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___