Steve Meisner <> [2009-01-09 07:46:20]:
> Could someone give me some pointers here? I managed to lose the redboot boot
> block on a TS-7260 I have. I have managed to get serial_blaster down to a
> newly built Debian Linux system and it's working. But what images for
> boot.bin and redboot.bin should I be using? When I use the boot.bin that
> comes out of the make process, I see the banner indicating a TS-7250 and not
> 7260...does that matter? And I have not come across a redboot.bin that seems
> to work to allow the 7260 to boot at all...I always get a timeout at the end
> of serial_blaster.
I think, that timeout isn't a problem. Just try run terminal, RedBoot should be
there. It's a long time I've erased RedBoot on my board so I don't remeber it
correctly.
-- ynezz
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|