Try to "trace" the startup phase, try to look at inittab and follow
the execution for the proper runlevel. Is it possible that the your
process is started but you don't see the output? Have you already
checked?
--- In "Anouk Ahamitet" <> wrote:
>
> I've set up a number of TS-7800 boards to load our software when they
> boot. I've done it enough times so that I have a checklist of steps to
> perform so that they all turn out the same. But with the "newest"
> board, it didn't work.
>
> We had sent the board back for repair (well, actually to get an
> advertised feature to work as advertised) and it came back with what
> appeared to be a "cleaned" (or reset or whatever one calls it) FLASH
> drive. So I got out my checklist and reinstalled our software and then
> added a link to our startup script as /etc/rc3.d/S98cpidac but that
> script never gets executed during boot.
>
> So I created the same link in /etc/rcS.d and even that one doesn't
> execute!
>
> Remember, all of the previous TS-7800's were configured exactly the same
> as this one (at least my part is exactly the same) and they all ran our
> program at boot. So I think something must be different in the system
> that was returned, but I've not been able to find out what (and the
> other boards were shipped, so I cannot compare with them).
>
> I did turn on the system log, but I'm not seeing any messages about
> start up problems. I'm also not seeing any messages from our program,
> unless I run it manually, which is not going to be acceptable for
> delivery.
>
> As I understand the debian policy for startup (from
> http://www.debian.org/doc/debian-policy/
> <http://www.debian.org/doc/debian-policy/> ), there's no reason why my
> script is not executing, so I think I need help and I hope I can find it
> here... please?
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|