Re: [ts-7000] TS7400: USB Device

[Pradip De <>]

I first booted into the 2.4 kernel and then used bootload to boot the zImage of the 2.6.21 kernel.
I actually gave  /bin/sh as the init script instead of linuxrc to boot into the busybox shell and then mounted the various devices from there.

For the pppd devices, I now see a terminated  connection immediately after I call pppd.

root#pppd /dev/bus/usb/001/002 115200 noauth persist local debug ipv6 ::cafe &
[1] 806
root#
[1]+  Done                    pppd /dev/bus/usb/001/002 115200 noauth persist local debug ipv6 ::cafe

Pradip

----- Original Message ----
From: Jordi Soucheiron <>
To:
Sent: Wednesday, October 8, 2008 12:11:07 PM
Subject: Re: [ts-7000] TS7400: USB Device

Could you explain how did you made the 2.6.21 kernel boot?
Have you looked at the dmesg output when you connect the device?

2008/10/8 Pradip De <m("ymail.com","pradipde");" target="_blank" href=""> com>

Hi,
I have the 2.6.21-ts kernel running with a Debian distribution on the TS-7400. However, when I try to start pppd, it doesnt recognise the usb device. I tried something like
  pppd /dev/bus/usb/ 005 115200 auth local  ipv6 ::cafe &
However, the device '/dev/bus/usb/ 005' isnt recognized. If anybody has tried something similar, I would like to know the name of the usb devices created.
thanks,
Pradip

--
Jordi Soucheiron
Software Engineer

DEXMA
Riu de l'Or 35, ES-08034, Barcelona
t:/f: +34 93 280 19 18
www.dexmatech. com
m("dexmatech.com","jsoucheiron");" target="_blank" href="">jsoucheiron@ dexmatech. com

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___