Re: [ts-7000] Re: IPv6 on TS-7400 : Howto?

[Pradip De <>]

Hi Jim,
Thanks again for the prompt response. I extracted their source and see that they have the ipv6 stack code. However, I have another query. I guess you did the recompilation in a PC running Linux. Does their makefile automatically build for the ARM or do I need to specify some switches, eg.,  CFLAGS etc, for correct crosscompilation on my Linux PC? I already have the crosstoolchain extracted and PATH set up to the bin directory containing the cross compiler executables.
thanks,
Pradip

----- Original Message ----
From: Jim Jackson <>
To:
Sent: Wednesday, September 17, 2008 4:14:10 PM
Subject: Re: [ts-7000] Re: IPv6 on TS-7400 : Howto?

On Wed, 17 Sep 2008, Pradip De wrote:

> Thanks Jim for the response. Could you give me some help in terms to the
> steps you followed to recompile the kernel with IPv6 support. Which
> source did you use? Could you direct me to that source containing the
> IPv6 stack, if possible?

I used the osurce provided by Technologics. It contains the IPv6 code if
the kernel is configured for it.

Jim

>
> Pradip
>
>
>
> ----- Original Message ----
> From: Jim Jackson < uk>
> To: .com
> Sent: Wednesday, September 17, 2008 12:45:39 PM
> Subject: Re: [ts-7000] Re: IPv6 on TS-7400 : Howto?
>
>
>
>
> On Wed, 17 Sep 2008, pidarped wrote:
>
>> Hi Jim,
>> Do you know if there is a convenient way to do it using apt-get or
>> something similar? When you recompiled the kernel did you do it for
>> the larger Debian distribution or the smaller onboardflash OS?
>
> for the smaller on-board flash image.
>
>>
>> --- In .com, Jim Jackson <> wrote:
>>>
>>>
>>>
>>>
>>> On Tue, 16 Sep 2008, pidarped wrote:
>>>
>>>> Hi,
>>>> Has anybody configured IPv6 on the TS-7400? I would like some help on
>>>> how ipv6 can be loaded as a module on the existing embedded OS
>>>> 2.4.26-ts11 that is loaded onto it.
>>>> thanks,
>>>
>>> On an earlier version 2.4.26-ts6 on a TS7200 I recompiled the kernel to
>>> include IPv6 support. It worked, but the implementation is not
>> complete. If
>>> I remember correctly it does autoconfiguration ok - picks up router
>>> advertisements, hence local subnet prefix, default router etc.
>>>
>>> cheers
>>> Jim
>>>
>>
>>
>>
>
>
>
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___