Yet another update. When I unplug JP2 I have no problems inserting
slhc regardless of the commented out line in inittab.
Any thoughts on why this is happening would be much appreciated.
Liam
--- In "relihanl" <> wrote:
>
> Here is something that appears to pertain to the problem...
>
> I can insert the module fine when both lgn0 and lgn1 are uncommented
> in /etc/inittab. however when I comment out the first lgn0, I get
the
> problem.
>
> I fail to see why this would be an issue. Am I missing something?
>
> #lgn0:12345:respawn:/sbin/getty -L 115200 ttyAM0
> lgn1:12345:respawn:/sbin/getty -L 115200 ttyAM1
>
> Liam
>
>
> --- In "relihanl" <relihanl@> wrote:
> >
> > Hi...
> >
> > when I try to do a simple insert of the slhc module, I get a
> complete
> > hang. While I can ping the system over ethernet, it is not
possible
> to
> > login, in fact a cold boot is required.
> >
> > I'm using a TS-7250 with TS-LINUX
> >
> > $ /sbin/modprobe -v slhc
> > insmod slhc
> > Using /lib/modules/2.4.26-ts11/kernel/drivers/net/slhc.o
> >
> > Liam
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|