[ts-7000] Re: slhc insertion hangs system

["relihanl" <>]

Here is something that appears to pertain to the problem...

I can insert the module fine when both lgn0 and lgn1 are uncommented 
in /etc/inittab. however when I comment out the first lgn0, I get the 
problem. 

I fail to see why this would be an issue. Am I missing something?

    #lgn0:12345:respawn:/sbin/getty -L 115200 ttyAM0
    lgn1:12345:respawn:/sbin/getty -L 115200 ttyAM1

Liam


--- In  "relihanl" <> wrote:
>
> Hi...
> 
> when I try to do a simple insert of the slhc module, I get a 
complete 
> hang. While I can ping the system over ethernet, it is not possible 
to 
> login, in fact a cold boot is required.
> 
> I'm using a TS-7250 with TS-LINUX
> 
>     $ /sbin/modprobe -v slhc
>     insmod    slhc
>     Using /lib/modules/2.4.26-ts11/kernel/drivers/net/slhc.o
> 
> Liam
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/