--- In "gpimentel074" <> wrote:
> OK.
> I made some tests after posted the message and now
> i'm able to change the green led state by changing
> the E0 register on GPIO. :) But i try to do the
> same thing with the DIO12 pin locate on B12 register
> on GPIO without success :(
> Here is my code made now in C code
Looks like good code -- I don't see anything wrong but then I'm not an
expert. }:-} The only thing I can suggest is that the IO pin on DIO12
requires a pullup resister.
Are you constantly getting a LOW or Tristate on DIO12? It may just be
that you need like a 4.7K pullup. I'd have to check the DPIO PDF files
of the user manual to see if pullups are needed or not, but that may be
the problem. Hell, it's worth a look, any way.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|