[ts-7000] TS-7800 Serial Port Question

["eric.robishaw" <>]

According to the 7800 docs, the 7800's COM3 header has 2 serial ports
(ttts4, ttts5). 

I'm currently able to use ttts4, but want to take advantage of
RTS/CTS, which the manual lists as being available for this port on
the RTS/CTS lines (7/8).

However, the docs also indicate ttts5 TX/RX on header 3 is using these
same pins (7/8).  So, which is it?

Are pins 7/8 
   RTS/CTS for ttts4 OR
   RX/TX for ttts5

I've tried looking at the schematics, but can't make heads or tails.




Eric



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/