vigu wrote:
> Went worse when i tied to do this.. i mistakenly did a fast boot 2 on
> linux rc so that it always boots from that and even when i tried doing
> with sd card boot it didnt. how am i to change the linuxrc back to
> normal.. please help me out.
You can edit the linuxrc file on the on-board flash from a Linux PC with
an SD-card reader. (The initrd is an ext2 fs on the second partition)
If the problem is on the on-board flash you can boot to the SD card,
mount the flash, and then edit that way. Boot order is SD, then flash
unless you have the jumper off (consult the prelim manual for more info
on this).
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|