ts-7000
[Top] [All Lists]

Re: [ts-7000] boot of 7800

To:
Subject: Re: [ts-7000] boot of 7800
From: vigu <>
Date: Mon, 28 Jul 2008 15:02:07 -0300
Thanks that worked great. Thanks a lot for the quick reply too

On Mon, Jul 28, 2008 at 2:58 PM, Michael Schmidt
<> wrote:
> vigu wrote:
>> Hi all
>>
>> I am very new to 7800 and linux. I want to know how to boot the
>> linuxrc-fastboot file instead of the sd card file. I tried pointing
>> the linuxrc file to the fastboot still when i restart it goes to the
>> sdcard and the linuxrc file gets back to point sdcard. Please help me
>> out witht this..
>
> The initrd is in RAM. For any changes you make to the ramdisk to take
> effect after reboot you need to run the 'save' command to save the
> ramdisk back to the boot media.
>
> ______ Best Regards,
> |__ __/ Michael Schmidt
> || Software Engineer
> ||echnologic Systems (EmbeddedARM.com)
> || (480) 16610 East Laser Drive #10
> |/ 837-5200 Fountain Hills, AZ 85268
> http://oz.embeddedarm.com/~michael
>
> 



-- 
With regards,
Vignesh Badrinarayanan

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU