[ts-7000] FPGA UART COM3 PROBLEM

["ts7300" <>]

Hi,
  I am using com3(TS7300)port with modem and in the same manner using
other board with modem and by ATDT dialing the modem and once two
board are connected using buad rate 115200bits/sec then using keyboard
sending data from one board to other but data is not receving on the
Board but instead of using 2 board,when I connected BOARD with
PC(LINUX)using modem then transmitting data from Board its coming on
TERMINAL of PC.But when I transmitting data from PC nothing is coming
on board,its means that board is not receiving data only transmitting
the data through COM3,I am stuck up at this problem.PLS Guide me.

THANX    


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/