[ts-7000] Qt 4 with ts7800

To:
Subject:	[ts-7000] Qt 4 with ts7800
From:	"allamack17" <>
Date:	Wed, 09 Jul 2008 15:33:11 -0000

Has anyone used Qt-embedded-4.4.0 with the ts7800?  I'm trying to
display images to the screen but they are coming through as garbage. 
When I run the same application on my laptop (instead of the 7800)
with qt4 everything displays correctly.  Is there something special I
need to do so qt-embedded-4.4.0 correctly writes the frame buffer on
the ts7800 board?


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Qt 4 with ts7800, allamack17 <=

Previous by Date:	Re: [ts-7000] Wlan0 doesn't go up at startup, Gonzalo A. de la Vega
Next by Date:	[ts-7000] YAFFS: Block at 0xXXXXXXXX is damaged and is not being formatted, gkwicker
Previous by Thread:	[ts-7000] TS-7KV board Screen Resolution Questions, srthaker
Next by Thread:	[ts-7000] YAFFS: Block at 0xXXXXXXXX is damaged and is not being formatted, gkwicker
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU